Contructed of a durable 2oz. polypropylene substrate with a multi -layer barrier film laminate, Tychem CPF3 and CPF 3HD Coveralls feature taped seam construction for maximum barrier protection. The integrated gloves and improved closures of the Tychem coverall can help reduce response time by making it faster and easier to put on and take off. These garments can be used in rigorous activities and where there is a potential for chemical activitie Splash. Suitable applications include chemical handling, petro chemical, hazardous material/waste clean -up, fire departments, homeland ,defense,industrial, hazmat teams and utilities. Feature include a zipper front, attached hood, elastic wrist and sock boot. Packaged 6 per case. Sold individually.
Strong and lightweight, this Tychem F Coverall is made of a proprietary barrier laminated to a Tyvek substrate. With features like a respiratory fit hood, storm flap, taped seams and borad chemical barrier properties, this garment is intended for wear in situations where the potential for exposure to chemical warfare agents exists. Coverall is gray for low visibility and folds into small packaged for easy, portable dtorage. All Tychem garments with attached socks. The attached socks must be worn inside protective outer footwear.
Made from a high strength nonwoven with non-halogenated films on either side. Specifically developed for protection against toxic, corrosive gases, liquids and solid chemicals. Tested against more than 280 chemicals. More than 260 of these with no observed permeation after eight hours of continuous Suit features double-taped seams, multi-layered PVC/Teflon face shield (PVC 40 mil/Teflon 5mil/PVC 20 mil) and a dual glove system(attached internal Barrier gloves with attached outer butyl gloves). Other featues include gas tight zipper closure, double storm flap over zipper, attached boots,outer boot flaps, knee wear pads, 2 exhaust valves, and internal adjsutable belt. Suit has rear entry with expanded back to accommodate SCBA. Certified compliant to ASTM F1052. Includes free carry case.
Available with easy- to-replace filter.Simply twist the 3M Particulate Filter 2091 P100 on the locking device of the face piece. Lightweight 2091 filter is fiberglass free and flame resistant. Made in USA. NIOSH approved.
High-intensity adjustable light beam (Spot to Flood)
Converts quickly to a freestanding candle mode
Rugged, machined aluminum construction with knurled design
Anodized inside and out for improved corrosion resistance
Water and shock resistant
Spare lamp safely secured inside the tailcap
Overall Length: 5-3/4 in. 146.00 mm
Barrel Diameter: 23/32 in. 18.23 mm
Head Diameter : 1 in. 25.40 mm
Weight without battery: 2.1 oz. 60 g
Weight with battery: 3.8 oz. 107 g
Peak Beam Candlepower: Up to 2952
Battery Life continuous on time: 5.5 hours
Battery voltage output: 3.0 volts
Batteries Required: Two (2) AA size alkaline
Black polypropylene holster
Two AA-cell premium alkaline batteries
2840 R Series R95 Particulate Respirator w/HandyStrap - Plus Nuisance Levels of Ozone and Organic Vapors Added sorbent helps filter out nuisance levels of ozone and organic vapors (less than OSHA PEL). For most welding applications where oils may be present. HandyStrap -, with buckle, allows mask to hang down around neck when not in use. Cloth strap feels cool and comfortable against the skin. Ventex - Valve lets the hot air out faster so workers stay cooler. Dura-Mesh - shell resists collapsing so masks lasts longer. Softspun - lining increases comfort and durability. Flame retardants are added to the shell to help decrease flammability. Contour molded nose bridge with soft foam nose flange provides all-day comfort. NIOSH certified to have a filter efficiency of 95% or greater against both oil and non-oil based particulate aerosols.
2800 N95 Particulate Respirator With HandyStrap - Premium welding respirator contains a special sorbent that helps relieve nuisance levels of ozone and organic vapor odors, making it suitable for most welding fumes. Flame retardants decrease the flammability of the shell. Dura-Mesh - shell resists collapse in heat and humidity, and Ventex - valve keeps breathing cool and easy. HandyStrap - with buckle keeps mask conveniently ready for use as it hangs loosely around neck. Soft foam nose flange fits mask snugly yet comfortably to face with no pressure points. Meets NIOSH 42CFR84 Standard. The 2850 Respirator Locker - provides hygienic and convenient storage for four 2800 N95 masks (included), saving time and preventing unnecessary waste.
The MOLLE ULC provides customizable equipment carrying via front and back MOLLE compatible webbing in a side-opening design. Additional features include front and back removable identification, adjustable shoulders, mesh inner lining, drag handle, badge grommets and internal cummerbund. The MOLLE ULC also accommodates PPI concealable ballistic panels. The MOLLE ULC accepts front and back 10"x12" Level III and IV hard armor plates.
N95 Particulate Respirators Collapse-resistant Dura-Mesh( -)shell lasts longer so workers use fewer masks. Shaped for comfort with molded contour nose bridge. Seals easily and comfortably without a metal noseband. NIOSH certified to have 95% filter efficiency level or greater against particulate aerosols free of oil up to 10X PEL. Time use restrictions may apply. TC-84A-0327. Sold 20 per package. Meets 42 CFR84 standard.
North® Barricade Tape - With a tensile strength of 124 lbs., this 2 mil thick Barricade Tape will withstand tough environmentss. Superior printing process ensures solid, even color for immediate reading
OccNomix Miracool Poncho. Smaller, economical version of our MiraCool Cooling vest. MiraCool crystals retain the coolness of cool water and work over lightweight shirt to continuously release cooling sensations which are carried throughout the body. Completely reversible, if cooling sensations diminish, renew and refresh coolness by turning vest inside out. Adjustable side straps. 100% cotton fabric. Size: Regular fits man's jacket size up to 46 American/56 European. Colors: Orange, Beige, High-Viz Orange, and Orange with Reflective Striping for added safety. 902
Engineered to Provide exceptional comfort and work protection, these disposable N95 Particulate Respirators feature a soft cushioned nose seal for comfort, a nose clip for good fit and latex-free headstraps. Ideal for dusty applications such as grinding, sanding and sweeping, they provide protection from solids and particulate aerosols free of oil. 10/BOX
Peltor's integrated 2-Way Radio Headsets are the perfect tool for communicating in high noise environments. Simple to operate and comfortable to wear, these headsets offer numerous features that will improve workplace efficiency. Self-contained 2 way radio headset uses 2 AA batteries Up to 2 mile transmitting range 14 license free channels, 38 subû privacy codes PTT or Voice Activated transmitting Tri lingual voice sub-system û English/Spanish/French NRR 25 dB
The Peltor - PTL (Push-To-Listen) earmuff eliminates the problem of having to hear speech and signals and have workers lift an earcup or remove earmuffs completely. Limited exposures to dangerous noise can greatly decrease effective protection levels. Now workers can have the best of both worlds. With single button simplicity, one earcup becomes activated in listening mode for a 30-second interval. To terminate the mode before 30 seconds, simply push the button. Listening mode allows unmuffled speech to be safely amplified to 87 dB. Patented liquid and foam filled cushions provide an optimum seal and comfort. Uses 1 AA battery (not included). NRR 26 dB.
The Vortec offers the highest power to weight ratio of anything in it's class. The front-mounted battery pack eliminates the need for external wiring and evenly distributes weight across your forehead. Harsher, cold weather conditions are no problem for the Vortec; it’s configured to provide significant extended burn times using lithium batteries without the need for bulb conversion.
Includes 1 halogen bulb, one long-burn bulb and wide and narrow beam reflectors
Requires 4 AA alkaline batteries or 4 lithium batteries
Halogen Incandescent Bulb burns brighter, longer and more efficiently
Waterproof and weather resistant
12mm NBR gel padding for maximum comfort and support
Cut-resistant, abrasion-resistant, and non-marring 420D nylon & Hypalon® rubber composite pad
Slip-resistant durable nylon-rubber surface to grip work surfaces
1680D ballistic nylon outer shell for puncture resistance
Breathable neoprene stretch strap adjusts for secure, comfortable fit.
Hook and loop closure
Wipe clean with damp cloth